As an Amazon Associate I earn from qualifying purchases.
Qifutan #ad - Easily adjust the distance between you and the car mount. Easy operation: car phone holder mount has a one-touch release button, you can release your phone with one hand while driving. Adjustable feet accommodate all 4. 0-7. 1 inch phones and most thick cases. To restore adhesion, simply rinse the sticky surface with warm water and wipe dry.
Cell phone holder is applied to most cars, Lyft drivers. The telescopic arm can be extended from 6. 5 inches to 8. 1 inches. Enhanced suction cup: phone holder mount is equipped with double-lock suction cup and uses heat-resistant TPU material, which can provide strong suction power on smooth surfaces, and keep the mount stable in any conditions.
Full protection: phone mount for car with vacuum silicone rubber and thick panels can provide full protection for your phone from scratches and drops even at high speeds, bumps or turns. Perfect flexibility: car phone holder with 360 degree ball joint and adjustable telescopic arm, which can adjust your phone to any ideal angle without obstructing your view. 3 in 1 car phone mount: cell phone holder car is equipped with a suction cup and vent clip, which can be freely mounted on the windshield, taxis.
CINDRO #ad - Secure grip & never fall off: the phone mount for car is armed with an innovative hollow silicone rubber. Firmly clip: the car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent.
Adjustable as your wish: with the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring.
Whenever and wherever, the phone holder for car vent can secure your driving safety. Note: this phone mount only can hook on horizontal air vent but it cannot be used on vertical or round air vENT. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4. 0-7. 2 inches, thin cases and other devices width between 2. 55-4. 11 inches, such as GPS devices.
Qifutan #ad - Most importantly, you can bend it in every direction to avoid obstructing the view. Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry. Note: only use the extra dashboard pad when the suction cup can not attach on the surface closeLY.
Smooth contact: the car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle.
Perfect choice for most cars, taxis, SUVs, vehicle, jeep wrangler; a good assistant for Uber, pickup trucks, trucks, Lyft drivers. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand.
Qifutan #ad - Ideal viewing angle: the 360° rotating and pivoting ball joint can be adjusted to any viewing angle and quickly switch between vertical and horizontal visual angles. The adjustable Bottom Foot can fit all phones. Perfect protection: the car vent phone mount is equipped with a thick layer of silicone which could protect your smartphone from wear and tear.
Upgraded vent clip: the car phone mount features a stronger, thinner vent clip and an innovative support ring for extra support, which could hold your phone securely on an air vent in your car.
Adjustable attachment: the phone holder car features an adjustable support ring, it can be rotated to any angle without blocking the vents. Note: this car mount for phone is only matched with horizontal blade air VENTS. Innovative hollow silicone rubber: the car mount for iphone is armed with an innovative hollow silicone rubber, which is more stable when compared with other common silicone rubbers.
TOLLEFE #ad - 15s quickly install this phone mount for car unlike dashboard car mounts that require 24 hours for the glue to set, our car vent phone mount can be installed in just 15 seconds. It can securely hold all 4. 0 to 7. 0 inch phones or phones with cases, including the iphone 14 pro max/pro/iphone 13 pro max/pro/mini/iPhone 12 Pro Max/Pro/Mini/11 Pro/11 Pro Max/X/XR/XS MAX/8/8 plus, but not PopSockets, LG V30/ V40.
1s quick lock & release with our car vent phone mount, you can easily lock and release your phone with just one hand. Broad compatibility tollefe phone holder for car vents fits 99% of car's a/c vertical and horizontal vents, samsung s23/s22/s21/note10/note10 plus/galaxy s10/s10+/s10e/ s9, whether the slats are thick or wide.
The clip also have a lip on the end to keep it from slipping out of the car vent. Even on bumpy dirt roads, your phone won't come loose or slip. 3 point support & hold your phone stably our car vent phone mount features a strong triangle support, and a firm, anti-slip rubber pads, scratch-free claw that offer a secure grip for your cellphone. Press the arms on both sides to clamp your phone in one second.
SUUSON #ad - To restore the stickiness, most likely will not work on leather/ vinyl dashboards. No need to worry that your phone will not fall off even on the most bumpy road. Easy operation, release or lock the phone within a few seconds-super convenient to use while driving. Perfect protection, please feel free to contact us, best design the car phone holder mount is covered with a thick layer of silica gel.
This mobile phone holder provides you with a simple way to securely fix your mobile phone in place, etc. Three-in-one phone holder for car our phone holder for car allows you to install it on the dashboard, trucks, and is ideal for cars, SUVs, windshield or vent without leaving any traces.
360°view angle available 360° ball joint and extendable telescopic arm 4. 43"-7. 31" allow you to adjust the phone to any angle. Strong adhesive suction the phone holder for car uses a powerful 3-layer viscous gel and a 1-step locking mechanism to provide strong suction on a smooth surface without leaving any residue. The suuson car phone holder mount has adjustable feet, stronger and wider clips, strong compatibility One-handed lightly touch, making this phone holder for car suitable for all 4.0"-7.
VANMASS #ad - Grandmaster easy clamp design, patented structure vanmass design the industry-leading easy clamp which has won 2 patents in EUIPO and passed Military-Grade Test to achieve quick clamping & release. In addition, max protection to phone & car vanmass car phone holder is the industry-first one that adapts the aviation material “PTFE” not cheap plastic, the original nano-steel vent clip grips tightly on the air vent without any shaking.
The 360-degree swivel head allows you to rotate the phone for portrait, and taxis; good assistant for Uber, SUVs, trucks, apply to most cars, and even bathtub, windshield, or desk. Better user experience, for sony, for samsung galaxy s21 s20 s10 s9 s8 s7 note 20 10 9 8, phone companion vanmass optimizes every detail of cell phone mount and is appreciated by many users worldwide.
Moreover, we offer a 3x suction power than other suction cups which can hold the phone steady even on a bumpy road. Better than other hard silicone, our air capsule silicone on the inside clamps make the phone bear the collision even without the phone case. Moreover, best mate anywhere Equipped with the suction cup and air vent clip, landscape view. Multiple original advantages, so it could work well in extremely harsh environments. Luxury present: high notch configuration & exquisite package vanMASS car phone mount is fully protected in an elegant & eco-friendly box.
VANMASS #ad - Depth of phone cradle: 07" thick Case Compatibility. Wish the simple product & service can please you. Ideal present for your specials. Original 4 technologies- thanks to millions of users' voice① extreme -40~194℉ weather resistance from precious KING of plastic ② Leading Suction Power up to 60LBS ③ Industry unique 1-gear structure for perfect 2-side clamp control ④ Steel-cored 3-Level Clip: 20X stable & durable.
Please mount on the windshield or air vent instead. Millions of users preferred 096” width bottom tray - easy to touch home button & plug charge cableUpgraded from flimsy drop-down bottom tray, the solider & Unlock screen & wider bottom tray can support any weight phone on the bumpy road.
2"-3. 8" universal Phone Compatibility. Luxury present: top-notch configuration & profound packageExquisite car phone mount suction cup/vent clip is fully protected in Elegant & Eco-friendly box. Luxury look & structure was certified by RoHS, CP65, REACH. Attention: the leather dashboard is noT suitable for ALL suction cups. Philosophy of chief designerit's my star work among 100+ car holder designs, which recovers originally simple. Length of telescopic arm: 5"-7.
andobil #ad - With 360° rotatable universal ball head, you can adjust your phone to the most convenient position and angle for you, so you can operate your phone comfortably and easily while driving. Super suction cup, rough road friendly upgraded three-layer nano-gel suction cups form a strong vacuum double lock with one click, up to 65 pounds suction force firmly grips the dashboard, stable as a rock, potholes and bumps and other rough roads.
Easy adjustable long arm to keep your phone within reach the improved and extended 7. 3 inch mechanical arm can be adjusted 270°.
More popular functions : One-button release system, reserved charging port, to provide maximum convenience for your driving. 3-in-1, suvs, can be firmly fixed on the dashboard, suitable for trucks, windshield and also vents, suitable for all Cars andobil car mount has nano gel suction cups and steel core vent clips, all cars.
LISEN #ad - Easy to change the installation location. 5. It has “three grasp points” with a shockproof sponge and rubber, which could hold the phone steadier. It is recommended to install the metal plate on the back of the phone or phone case. Our 2 pack magnetic phone holder for car not only has the same high quality as the one pack but also can save you more than 40% than buying one by one.
Do not damage the car dashboard. 4. Get easy access to charging and a convenient location. 3.
2. Please note: 1. Give you a secure and stable place for your phone. 2. The phone holder for car fits all 4-7'' iPhone, Samsung, and other cellphones with thick cases.
1. Qifutan
#adCar Phone Holder Mount Military-Grade Suction & Stable Hook Phone Mount for Car Windshield Dashboard Air Vent Universal Hands-Free Automobile Mounts Cell Phone Holder Fit for iPhone Smartphones
#adCell phone holder is applied to most cars, Lyft drivers. The telescopic arm can be extended from 6. 5 inches to 8. 1 inches. Enhanced suction cup: phone holder mount is equipped with double-lock suction cup and uses heat-resistant TPU material, which can provide strong suction power on smooth surfaces, and keep the mount stable in any conditions.
More information #ad
A perfect assistant for uber, dashboard, pickup trucks, SUVs, and air vent for feeding your different usage needs. Full protection: phone mount for car with vacuum silicone rubber and thick panels can provide full protection for your phone from scratches and drops even at high speeds, bumps or turns. Perfect flexibility: car phone holder with 360 degree ball joint and adjustable telescopic arm, which can adjust your phone to any ideal angle without obstructing your view. 3 in 1 car phone mount: cell phone holder car is equipped with a suction cup and vent clip, which can be freely mounted on the windshield, taxis.
| Brand | Qifutan #ad |
| Manufacturer | Qifutan #ad |
More information #ad
2. CINDRO
#adPhone Holder Car Upgrade Clip Never Fall Car Phone Holder Mount Automobile Air Vent Hands Free Cell Phone Holder for Car Fit for All Car Mount for iPhone Android Smartphone
#adAdjustable as your wish: with the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring.
More information #ad
It can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all. The quick release button and adjustable clamp arm make it very easy to sheathe and remove your phone just with one hand. Whenever and wherever, the phone holder for car vent can secure your driving safety. Note: this phone mount only can hook on horizontal air vent but it cannot be used on vertical or round air vENT. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4. 0-7. 2 inches, thin cases and other devices width between 2. 55-4. 11 inches, such as GPS devices.
| Brand | CINDRO #ad |
| Manufacturer | CINDRO #ad |
| Weight | 0.02 Pounds |
| Part Number | AUB09MVZFXCC |
More information #ad
3. Qifutan
#adQifutan Cell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone
#adSmooth contact: the car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle.
More information #ad
Fit well for the smartphone which’s the width between 4''-7''in and the most thickness. You can enjoy a more convenient and secure drive. Note: not recommended to use the extra dashboard pad for windshield mountiNG. It sticks securely and easily on the dashboard or most flat surfaces and removes the phone car mount without leaving any nasty marks. Perfect choice for most cars, taxis, SUVs, vehicle, jeep wrangler; a good assistant for Uber, pickup trucks, trucks, Lyft drivers. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand.
| Brand | Qifutan #ad |
| Manufacturer | Qifutan #ad |
| Part Number | HD-C77 |
| Model | HD-C77 |
| Warranty | B097D7XKKZ |
More information #ad
4. Qifutan
#adIPhone, Cell Phone Automobile Cradles Universal, Qifutan Phone Mount for Car Vent Upgraded Metal Clip Cell Phone Holder Car Hands Free Cradle in Vehicle Car Phone Holder Mount Fit for Smartphone
#adUpgraded vent clip: the car phone mount features a stronger, thinner vent clip and an innovative support ring for extra support, which could hold your phone securely on an air vent in your car.
More information #ad
When you put your phone on the car phone mount, your phone can fully fit the hollow silicone rubber cushion so that it won't drop at all. Adjustable attachment: the phone holder car features an adjustable support ring, it can be rotated to any angle without blocking the vents. Note: this car mount for phone is only matched with horizontal blade air VENTS. Innovative hollow silicone rubber: the car mount for iphone is armed with an innovative hollow silicone rubber, which is more stable when compared with other common silicone rubbers.
| Brand | Qifutan #ad |
| Manufacturer | Qifutan #ad |
| Weight | 0.02 Pounds |
| Model | HD-C78 |
More information #ad
5. TOLLEFE
#adFit for All iPhone Samsung Phones, 2023 Upgraded Car Phone Holder, Military-Grade Protection Air Vent Car Mount Big Phone & Thick Cases Friendly Hands Free Cell Phone Automobile Clamp Cradles
#ad1s quick lock & release with our car vent phone mount, you can easily lock and release your phone with just one hand. Broad compatibility tollefe phone holder for car vents fits 99% of car's a/c vertical and horizontal vents, samsung s23/s22/s21/note10/note10 plus/galaxy s10/s10+/s10e/ s9, whether the slats are thick or wide.
More information #ad
360°rotate & easy to adjust position the car phone holder rotates 360°, so you can adjust your phone to portrait or landscape mode for better sight level. Military-grade durable metal screw clip tollefe car phone holder mount vent clip adopts 2023 latest Military-Grade metal screw mechanical lock design, which 10X durable than other plastic clips. The clip also have a lip on the end to keep it from slipping out of the car vent. Even on bumpy dirt roads, your phone won't come loose or slip. 3 point support & hold your phone stably our car vent phone mount features a strong triangle support, and a firm, anti-slip rubber pads, scratch-free claw that offer a secure grip for your cellphone. Press the arms on both sides to clamp your phone in one second.
| Brand | TOLLEFE #ad |
| Manufacturer | TOLLEFE #ad |
| Height | 2.44 Inches |
| Length | 6.89 Inches |
| Width | 3.58 Inches |
| Warranty | 2 Years |
More information #ad
6. SUUSON
#adCar Adjustable Phone Holder, Suitable for car Dashboard/Windshield/Vent, SUUSON Phone Holder for car -3in1 Long arm car Phone Holder Mount, Compatible with All Smart Phones and Cars
#adThis mobile phone holder provides you with a simple way to securely fix your mobile phone in place, etc. Three-in-one phone holder for car our phone holder for car allows you to install it on the dashboard, trucks, and is ideal for cars, SUVs, windshield or vent without leaving any traces.
More information #ad
Avoid obstructing the line of sight during driving to ensure driving stability and safety. This cell phone holder for car allows you to use your phone in portrait and landscape mode. 360°view angle available 360° ball joint and extendable telescopic arm 4. 43"-7. 31" allow you to adjust the phone to any angle. Strong adhesive suction the phone holder for car uses a powerful 3-layer viscous gel and a 1-step locking mechanism to provide strong suction on a smooth surface without leaving any residue. The suuson car phone holder mount has adjustable feet, stronger and wider clips, strong compatibility One-handed lightly touch, making this phone holder for car suitable for all 4.0"-7.
| Brand | SUUSON #ad |
| Manufacturer | SUUSON #ad |
| Height | 2.5 Inches |
| Length | 6.2 Inches |
| Weight | 0.37 Pounds |
| Width | 6.1 Inches |
More information #ad
7. VANMASS
#adVANMASS Upgraded Car Phone Mount, Handsfree Dash Stand for Universal iPhone 14 13 12 11 Pro XS Max 8 Samsung, Strong Suction & Military-Grade Cell Phone Holder Car Dashboard Windshield Air Vent
#adThe 360-degree swivel head allows you to rotate the phone for portrait, and taxis; good assistant for Uber, SUVs, trucks, apply to most cars, and even bathtub, windshield, or desk. Better user experience, for sony, for samsung galaxy s21 s20 s10 s9 s8 s7 note 20 10 9 8, phone companion vanmass optimizes every detail of cell phone mount and is appreciated by many users worldwide.
More information #ad
The first ergonomic fingerprint design on both clamps allows you to squeeze the arms to hold your phone firmly; The first adjustable foot could be for iPhone 14 13 12 11 Pro Max SE XR XS Max X 8Plus 7Plus, for Google, for LG, etc. Moreover, we offer a 3x suction power than other suction cups which can hold the phone steady even on a bumpy road. Better than other hard silicone, our air capsule silicone on the inside clamps make the phone bear the collision even without the phone case. Moreover, best mate anywhere Equipped with the suction cup and air vent clip, landscape view. Multiple original advantages, so it could work well in extremely harsh environments. Luxury present: high notch configuration & exquisite package vanMASS car phone mount is fully protected in an elegant & eco-friendly box.
| Brand | VANMASS #ad |
| Manufacturer | VANMASS #ad |
| Height | 5.83 Inches |
| Length | 3.5 Inches |
| Width | 2.99 Inches |
| Part Number | VANMASS |
| Model | EZ11CTBK1A-GL-2-VM |
| Warranty | VANMASS offers 36-month warranty(24 months more than others) 7 * 24 hours service team All the issues will be solved in your favor way. VANMASS stands behind our quality promise, so we are happy to provide 36-month warranty for every unit. Welcome to contact our warmhearted service support about any issue. |
More information #ad
8. VANMASS
#adVANMASS Universal Car Phone Mount,Patent & Safety Certs Upgraded Handsfree Stand, Compatible iPhone 13 12 11 Pro Max Xs XR X 8, Galaxy s20 Note 10 9, Phone Holder for Car Dashboard Windshield Vent
#adPlease mount on the windshield or air vent instead. Millions of users preferred 096” width bottom tray - easy to touch home button & plug charge cableUpgraded from flimsy drop-down bottom tray, the solider & Unlock screen & wider bottom tray can support any weight phone on the bumpy road.
More information #ad
Width of clamp arm: 2. 2"-3. 8" universal Phone Compatibility. Luxury present: top-notch configuration & profound packageExquisite car phone mount suction cup/vent clip is fully protected in Elegant & Eco-friendly box. Luxury look & structure was certified by RoHS, CP65, REACH. Attention: the leather dashboard is noT suitable for ALL suction cups. Philosophy of chief designerit's my star work among 100+ car holder designs, which recovers originally simple. Length of telescopic arm: 5"-7.
| Brand | VANMASS #ad |
| Manufacturer | VANMASS #ad |
| Height | 4.53 Inches |
| Length | 4.96 Inches |
| Weight | 0.51 Pounds |
| Width | 3.62 Inches |
| Part Number | VMVK13CTBK1-1 |
| Model | CTVK13 |
| Warranty | Every VANMASS car mount comes with 36-month replacement warranty. |
More information #ad
9. andobil
#adSamsung Galaxy S22 All Phones, andobil Phone Mount for Car Bumpy Roads Friendly Cell Phone Holder Car — Easy Clamp Hands-Free Universal — Fit for Dashboard-Windshield-Vent iPhone 14 13 12 Pro Max
#adEasy adjustable long arm to keep your phone within reach the improved and extended 7. 3 inch mechanical arm can be adjusted 270°.
More information #ad
Deeper and wider clip arm, can accommodate larger and thicker phones, compatible with all phones Extra wide and deeper adjustable clip arm, compatible with all 4-7 inch smartphones. Triangular structure to hold your phone firmly andobil phone mount features a non-slip rubber pad, solid support frame and strong and scratch-free claws to form a solid triangle support to ensure your smartphone sits firmly in the car mount like a baby while driving, without distracting you from driving. More popular functions : One-button release system, reserved charging port, to provide maximum convenience for your driving. 3-in-1, suvs, can be firmly fixed on the dashboard, suitable for trucks, windshield and also vents, suitable for all Cars andobil car mount has nano gel suction cups and steel core vent clips, all cars.
| Brand | andobil #ad |
| Manufacturer | andobil #ad |
| Height | 5.8 Inches |
| Length | 3.5 Inches |
| Weight | 0.37 Pounds |
| Width | 3 Inches |
| Part Number | andobil-US |
| Model | CTEZ47 |
More information #ad
10. LISEN
#adAndroid, LISEN 2 Pack Magnetic Phone Holder for Car Mount 6 Military Magnets Car Phone Holder Mount Hands Free Vent Cell Phone Holder Mount for Car 6 Metal Plates Fit All iPhone 14/13/12/11, Pro Max
#adDo not damage the car dashboard. 4. Get easy access to charging and a convenient location. 3.
More information #ad
The car holder holds most smartphones and mini tablets compatible with iphone 14 13 12 11 pro max / galaxy note20 u, S23 S22 S21 S20 S10 S9 S8 S7 S6, iPad Air 2 / X / Mini 3 / XR / 8/7/6/5, telephone signal, Note 9 / Pro 9.7 and more. 2 pack, a gift for life️: with this lisen 2 pack magnetic vent phone holder, you will have the following happy moment:① for one car: no worries about being bothered by phone calls or music switching while driving to ensure safer driving, your friend can enjoy movies with hands-free operation during long journeys.22. Please note: 1. Give you a secure and stable place for your phone. 2. The phone holder for car fits all 4-7'' iPhone, Samsung, and other cellphones with thick cases.
| Brand | LISEN #ad |
| Manufacturer | LISEN #ad |
| Height | 2.56 Inches |
| Length | 1.93 Inches |
| Weight | 0.22 Pounds |
| Width | 1.42 Inches |
| Part Number | TLV633-BK |
| Model | TLV-633 |
More information #ad
