Senville SENL-18CD Mini Split Air Conditioner Heat Pump 18000 BTU 19 SEER

#ad
Senville SENL-18CD #ad - Copper Line Set. With seer ratings as high as 19, offers powerful cooling, the LETO Series, heating and dehumidification functions. Please note: Requires professional installation. Cooling power:18000 item may ship in more than one box and may arrive separately. Mini split ductless air Conditioner and Heater - 19 SEER.

The leto series by senville, is an affordable and efficient way to cool and heat your home. Includes easy installation Kit with 16 Ft. Designed with inverter technology, our air conditioner / heat pumps provide you with an efficient way to give your home complete climate control. This mini split air conditioner and heat pump up to 5F/-15C is a great permanent addition to any home or business.

Senville SENL-18CD Mini Split Air Conditioner Heat Pump 18000 BTU 19 SEER #ad - Whisper technology for quiet Operation, Additions, Great for Bedrooms, Living Rooms and Commercial Applications. A great way to heat and cool your home all year round. 4-in-1 design - with air conditioning, heating, dehumidifier and fan. Low ambient kit - cool and heat your room even in temperatures as low as 5F.

#ad



Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE

#ad
Pioneer WYS-POAD-BRS #ad - Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. New r410a ductless mini split systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system i. E. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. This new port size is 5/16" saE and some gauge sets carry 1/4" SAE connectors.

Port adapter converts the 5/16" SAE ports to use with 1/4" SAE gauge sets. Used on most newer R410A Ductless Mini Split Systems. R22.

#ad



Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

#ad
DuctlessAire FBA_CECOMINOD072410 #ad - It includes hardware and expansion bolts for wall mounting. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Used on most newer R410A Ductless Mini Split Systems. Please check to ensure clearance requirements are being met for your minisplit unit. See pictures for dimensions.

Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Dimensions: Width: 33. 5" height: 18" depth: 22". Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Brass construction, with full swivel tip.

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser #ad - 5/16" female, 1/4" Male SAE. The bracket is 18" tall and the arms are 22" long. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Universal heavy duty outdoor wall bracket. As an alternative to ground level pads, debris, vandalism, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, etc.

Cross bar, wall fixation kit, each arm has two upgraded 8.

#ad



Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant

#ad
Refrigeration Technologies RT201B #ad - Product with good quality. Requires 1/2 inch 12 mm bit. Refrigeration Technologies. As an alternative to ground level pads, debris, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, vandalism, etc. Cross bar, wall fixation kit, each arm has two upgraded 8.

8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant #ad - Refrigeration technologies nylogâ" gasket thread sealant and assembly lube #rt201b. Nylog-gasket/thread sealant. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Fits 9000-36000 Btu Units. It includes hardware and expansion bolts for wall mounting.

#ad



SIEMENS WN2060U Non-Fused AC Disconnect

#ad
Siemens WN2060U #ad - Pull out type. It includes hardware and expansion bolts for wall mounting. 60 amp. As an alternative to ground level pads, debris, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, floods, vandalism, etc. Cross bar, wall fixation kit, each arm has two upgraded 8.

8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Universal heavy duty outdoor wall bracket. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

SIEMENS WN2060U Non-Fused AC Disconnect #ad - Dimensions: Width: 33. 5" height: 18" depth: 22". Non-fused. Ul listed. Nylog-gasket/thread sealant. Fits 9000-36000 Btu Units. Siemens wn2060u non-fused ac disconnect converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

#ad



Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2"

#ad
Sealproof #ad - Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Dimensions: Width: 33. 5" height: 18" depth: 22". Used on most newer R410A Ductless Mini Split Systems. It includes hardware and expansion bolts for wall mounting.

The sealproof power Whip Assembly is assembled with all UL components. Non-fused. Universal heavy duty outdoor wall bracket. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Designed for easy installation, oil, it resists corrosion, and water, as well as being sunlight and outdoor resistant.

Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2" #ad - As an alternative to ground level pads, vandalism, debris, floods, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, etc. Cross bar, wall fixation kit, each arm has two upgraded 8. 8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall.

Slight rearward tilt to wall is recommended for safety purposes. Resists corrosion, oil and water; Outdoor, sunlight resistant.

#ad



Senville HA-550 Wall Mounting Bracket for Mini Split Air Conditioner

#ad
Senville H550 #ad - Requires 1/2 inch 12 mm bit. Refrigeration Technologies. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

Fits 9000-36000 Btu Units. Pull out type. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Whip is assembled with all UL components. Ul listed. Non-fused. Nylog-gasket/thread sealant. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. High quality construction, galvanized, from heavy duty steel, with weather proof paint.

Senville HA-550 Wall Mounting Bracket for Mini Split Air Conditioner #ad - Supports up to 330 lbs. As an alternative to ground level pads, floods, snow, vandalism, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, etc. Cross bar, wall fixation kit, each arm has two upgraded 8. 8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall.

#ad



Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers

#ad
Pioneer BRK-FLD-2P #ad - Non-fused. Dimensions: Width: 33. 5" height: 18" depth: 22". Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Requires 1/2 inch 12 mm bit. Refrigeration Technologies. Pull out type. Resists corrosion, oil and water; Outdoor, sunlight resistant. Lower installation cost and a time saving convenience.

Applications: air condition unit hook up; heat pumps; pools; spas; outdoor lighting; motors and controls; solar panels. Nylog-gasket/thread sealant. Outdoor rated. 60 amp. Ul listed. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers #ad - Great for larger mini split systems, 18000 BTU, including 12000 BTU, and 24000 BTU. Includes vibration blocking rubber support rings, to minimize noise and vibration. Includes all hardware for attaching outdoor compressor, and bolts for wall mounting. It includes hardware and expansion bolts for wall mounting.

#ad



w/Case - Diagnostic R12 R22 R134a R410A - HVAC A/C Refrigeration Kit - BACOENG Vacuum Pump & Manifold Gauge Set

#ad
BACO ENGINEERING #ad - Used on most newer R410A Ductless Mini Split Systems. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Introduction: 1. Ul listed. Hose working pressure: 800psi-4000psi Acceptable refrigerant: CFC HCFC and HFC.

Great for larger mini split systems, including 12000 BTU, 18000 BTU, and 24000 BTU. Includes vibration blocking rubber support rings, to minimize noise and vibration. Includes all hardware for attaching outdoor compressor, and bolts for wall mounting. As an alternative to ground level pads, vandalism, floods, debris, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, etc.

w/Case - Diagnostic R12 R22 R134a R410A - HVAC A/C Refrigeration Kit - BACOENG Vacuum Pump & Manifold Gauge Set #ad - Cross bar, wall fixation kit, each arm has two upgraded 8. 8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Pressure and Temperature Displayed. Designed for easy installation. Accessory--3 × 4ft blue red yellow refrigrant hose, 12oz vacuum oil, 2 × 1/4" sae Male to 5/16" SAE Female Adapters(R410a), 1 × toolkit, 1 × Manual for Pump and Gauge.

Hose-- all hose are complied with sae-j2196 standard standard.

#ad



Senville Smart WiFi Kit USB for iOS and Android

#ad
Senville #ad - Compatible with most mini spit air conditioners. Helps protect your ductless air conditioner from the elements, water build up, including snow, and grass clippings. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.

4 rubber vibration absorbers also included. 4 sizes to choose from. Universal heavy duty outdoor wall bracket. High quality construction, from heavy duty steel, galvanized, with weather proof paint. Supports up to 330 lbs. 60 amp. Nylog-gasket/thread sealant. Resists corrosion, oil and water; Outdoor, sunlight resistant.

Senville Smart WiFi Kit USB for iOS and Android #ad - Lower installation cost and a time saving convenience. Applications: air condition unit hook up; heat pumps; pools; spas; outdoor lighting; motors and controls; solar panels. Multi-function gauge-- ideal for r12 r22 r134aneed Additional Quick Couplers R410A R407C. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, floods, vandalism, snow, debris, etc.

Cross bar, wall fixation kit, each arm has two upgraded 8. 8 grade bolts with lock nuts, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall.

#ad



7.5 Ft Line Set Cover Kit 3" for Mini Split and Central Air Conditioner & Heat Pump Line Set Cover Kit Decorative Tubing Cover Product ID: 758149825748

#ad
DuctlessAire DA3-7KIT #ad - Outdoor rated. Whip is assembled with all UL components. Flow rate: 3. 6cfm power: 1/4hp ultimate Vacuum: 08pa. Fits 9000-36000 Btu Units. Hose working pressure: 800psi-4000psi Acceptable refrigerant: CFC HCFC and HFC. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.

Gauge set -- 2 valve manifold with sight-glass & 1/4" SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading. Standard professional grade for durability and weather resistant, paintable. Allows worldwide access and control of your system.

7.5 Ft Line Set Cover Kit 3" for Mini Split and Central Air Conditioner & Heat Pump Line Set Cover Kit Decorative Tubing Cover Product ID: 758149825748 #ad - Free downloadable app for IOS or Android. Full programming and reporting interfaces. Hide-a-line kit includes covers to accommodate most applications to protect and hide wiring and connection lines for a sleek, polished finish. Please note, one section of tubing is wider to ensure a secure seal. Hide-a-line tube material makes easy cut to fit previous and existing installations.

The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

#ad