Pomona 6405/POM Insulation Piercing Clip Set Pack of 2

#ad
Pomona Electronics 6405/POM #ad - Spring loaded double "v" clamp holds wire centered for piercing needle. Clips can pierce insulation on wires from 22 to 14 AWG 0030" 076mm through 0180" 046mm in diameter. The tiny hole left in the insulation can easily be sealed. The piercing clips allows users to make contact with insulated wires without cutting or stripping the insulation of the wire.

Make contact with insulated wires without cutting or stripping insulation. Pierces insulation on wires from 22 to 14 awg 0030" through 0180" diameter. The 6405 is a set of black and red insulated Piercing clips with banana jacks for connections to 4mm Test leads.

#ad



Heavy Duty Insulation Piercing Test Clip, Fully Insulated Quick Piercing Test Clips Multimeter Test Probe Spring Load

#ad
TestHelper #ad - Material: shell pa, the main copper + stainless steel nickel-plated Wire Size: Wire largest diameter 3. 5mm, 16awg-23awg banana socket:4mm Weight:50g2Pcs. Type: fully insulated quick piercing test clip Quantity: 2Pcs Black and Red Rating: CATIII 1000V, 10A Max.

#ad



Tool Aid SG 23500 Back Probe Kit

#ad
SG Tool Aid 23500 #ad - M10x1. 0 flare nut European/Domestic 4 pack. Probes easily insert into automotive connectors. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug.

Insulated body for testing up to 30 volts.

#ad



ESI 307M Fuse Buddy Mini Current Loop

#ad
Electronic Specialties 307M #ad - 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Easy testing access; plugs right into fuse socket; no more hand made adapters. Insulated body for testing up to 30 volts. Great accessory for any current probe or automotive scope. Also handy for installers needing to monitor circuit amperage limits.

Probes easily insert into automotive connectors. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. Just clamp your current probe over the loop to access the amperage draw through a fused circuit. Plug a fuse buddy current loop into a circuit and now you can clamp your current probe over the wire to read the amperes draw.

ESI 307M Fuse Buddy Mini Current Loop #ad - Testing range 0-30 amperes, do not exceed 30 amperes. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors.

#ad



OTC 3633 Mini-Coil Cord Circuit Tester

#ad
OTC 3633 #ad - Probes easily insert into automotive connectors. It is useful in testing electrical circuits and locating shorts, grounds, and open circuits. 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Stainless steel, straight, 45 and 90 degree probes in. 027" and.

040" diameters. Also handy for installers needing to monitor circuit amperage limits. Special threaded probe comes with screw on alligator clip for additional versatility. Dwell measurement and O2 cross counts. Testing range 0-30 amperes, do not exceed 30 amperes. Easy testing access; plugs right into fuse socket; no more hand made adapters.

OTC 3633 Mini-Coil Cord Circuit Tester #ad - Just clamp your current probe over the loop to access the amperage draw through a fused circuit. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. It features 12 feet heavy-duty red coil cord lead, checks 6- and 12-volt systems, positive contact-molded strain relief, ergonomic slim designed clear handle, bright red high intensity/slim style replaceable bulb, heavy-duty stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection.

Insulated body for testing up to 30 volts. Great accessory for any current probe or automotive scope. Otc mini-coil cord circuit Tester small handle with needlepoint stainless steel probe allows easy back probing and piercing.

#ad



Electronic Specialties 619 Wire Piercing Clips, 2 Pack

#ad
Electronic Specialties 619 #ad - 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems. Insulated body for testing up to 30 volts. Fits any test lead with standard 4mm banana plugs. Great accessory for any current probe or automotive scope.

Probes easily insert into automotive connectors. Makes testing contact with insulated wires - no wire Stripping. Easy testing access; plugs right into fuse socket; no more hand made adapters. Dwell measurement and O2 cross counts. Useful in testing electrical circuits and locating shorts grounds and open circuits.

Electronic Specialties 619 Wire Piercing Clips, 2 Pack #ad - . Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Also handy for installers needing to monitor circuit amperage limits. Pierces wire insulation sized from 22 to 14 AWG, sharp needle minimizes insulation damage. Testing range 0-30 amperes, do not exceed 30 amperes.

Compatible with electronic Specialties 140-1 and most test lead kits in the field. Small handle with needlepoint stainless steel probe allows easy back probing and piercing.

#ad



Hantek 20:1 Passive Attenuator For Pico, Other Makes, 300v Max Original Version

#ad
AIDETEK HT-201 #ad - Makes testing contact with insulated wires - no wire Stripping. Also handy for installers needing to monitor circuit amperage limits. Small handle with needlepoint stainless steel probe allows easy back probing and piercing. Insulated body for testing up to 30 volts. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors.

Pierces wire insulation sized from 22 to 14 AWG, sharp needle minimizes insulation damage. Dwell measurement and O2 cross counts. Max. Voltage 300V. 20:1 attenuation,. 10 mhz -3 db bandwidth,. Please note this attenuator can not be used for any high voltage measurements other than fuel injectors and primary ignition.

Hantek 20:1 Passive Attenuator For Pico, Other Makes, 300v Max Original Version #ad - Probes easily insert into automotive connectors. This passive attenuator can be used to measure fuel injector and primary ignition waveforms utilizing an oscilloscope of any brand. Special threaded probe comes with screw on alligator clip for additional versatility. 11 pf input capacitance,. Stainless steel, straight, 45 and 90 degree probes in.

#ad



Pomona 6413 Insulation Piercing Clip Set Pack of 2

#ad
Pomona Electronics 6413 #ad - The piercing clips allows users to make contact with insulated wires without cutting or stripping the insulation of the wire. Great accessory for any current probe or automotive scope. Dwell measurement and O2 cross counts. Also handy for installers needing to monitor circuit amperage limits. Probes easily insert into automotive connectors.

Insulated body for testing up to 30 volts. Make contact with insulated wires without cutting or stripping insulation. Easy testing access; plugs right into fuse socket; no more hand made adapters. Testing range 0-30 amperes, do not exceed 30 amperes. Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems.

Pomona 6413 Insulation Piercing Clip Set Pack of 2 #ad - 10 mhz -3 db bandwidth,. Useful in testing electrical circuits and locating shorts grounds and open circuits. 1. 053mΩ input Impedance,. The tiny hole left in the insulation can easily be sealed. Color identified Back Probes for use on harness connectors, fuel injectors and automotive sensors. Spring loaded double "V" clamp holds wire centered for piercing needle.

#ad



General Technologies Corp GTC063 Fuse Socket Connector Kit

#ad
General Technologies Corp GTC063 #ad - Pierces wire insulation sized from 22 to 14 AWG, sharp needle minimizes insulation damage. Maxi, atc/ato, mini, micro-2, low-profile mini lpm, and micro-3 are the six most common blade fuse sizes in the automotive and vehicular electrical repair field. Makes testing contact with insulated wires - no wire Stripping.

These connectors can be used in the testing of cooling fans, radios, Relays, Electric fuel pumps, power window motors, lamps, wiring harnesses, Electric doors, cd players and stereo power lines and any component or Module wired or connected to the car or vehicle's fuse box. Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems.

General Technologies Corp GTC063 Fuse Socket Connector Kit #ad - Dwell measurement and O2 cross counts. Testing range 0-30 amperes, do not exceed 30 amperes. Ergonomically molded connector for easy insertion and extraction. 11 pf input capacitance,. The easy access connector tabs are designed to be used with 1/4" or 0205" quick connects, jumper leads, alligator clips, or Multimeter test leads.

Max. Voltage 300V. Special threaded probe comes with screw on alligator clip for additional versatility.

#ad



Electronic Specialties 142-5 Flexible Silicon Back Probe Pin

#ad
Electronic Specialties 142-5 #ad - 11 pf input capacitance,. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. Features 12 feet heavy-duty red coil cord lead and checks 6 and 12 volt systems. Probes easily insert into automotive connectors. Can be used up to 30 Volts. Pierces wire insulation sized from 22 to 14 AWG, sharp needle minimizes insulation damage.

These have become very popular for use in diagnostic troubleshooting. 1. 053mΩ input Impedance,. Testing range 0-30 amperes, do not exceed 30 amperes. Flexible 1. 5 inch silicon pins provide easy back probing connections for DMM and scope measurements. Just clamp your current probe over the loop to access the amperage draw through a fused circuit.

Electronic Specialties 142-5 Flexible Silicon Back Probe Pin #ad - These can be used up to 30 Volts DC with most test lead sets. Connects to test leads with removable ends. Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. Contact needle is screwed in/out from the bottom.

#ad



Lisle 55000 Wire Holder Assembly

#ad
Lisle 55000 #ad - Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. Stainless steel, straight, 45 and 90 degree probes in. 027" and. 040" diameters. Insulated body for testing up to 30 volts. Flexible design allows different ways to attach and hold wire.

11 pf input capacitance,. Alligator clamps firmly hold wire and small parts when soldering. Great accessory for any current probe or automotive scope. Flexible design allows different ways to attach and hold wire. Dwell measurement and O2 cross counts. Base is also hex shaped and can fit in a vise when needed. Useful in testing electrical circuits and locating shorts grounds and open circuits.

Lisle 55000 Wire Holder Assembly #ad - 12" extension leads quickly plug in to permit testing in recessed areas, compatible with standard 4mm plug. Connects to test leads with removable ends. Magnetic arms are detachable and can be moved and used without the base. Pierces insulation on wires from 22 to 14 AWG 0030" through 0

#ad