MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

#ad
MUYI 5824075164 #ad - 2,it is important to select the correct Amp rating before you install or replace fuses even though they come with commonly 2x 15A fuses. In-line fuse holder for mini blade fuses, 15a, 3a, 7.5a, 20a, 5a, 2a, 10a, suitable for 1A, ideal for car truck atv boat.14 awg thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.

. 30cm/12inches pigtail wire allow you to cut and splice it into any project. Muyi high quality fuse holder and correct fuse can protects a circuit from overloading in extreme operating conditions or in the event of a short circuit, keep your car and electric device in safe condition. Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses #ad - Not easy to fall off or let water in. Package included: 2 x mini blade Fuse Holder and 2 X 15A Mini Blade Fuse. Water-proof in-line fuse holder provided by MUYI Features excellent water-proof design with tight-fitting rubber cap, 14 AWG thick copper wire. Specification: material:coppercoated with tin, rubber condition:100% new color:black with red wire operating temperature: 30℃~170℃ fuse holder dimension:approx 38x25x13mm Wire Length:approx 30cm/12inches Wire Range:14 AWG Amp Range of Fuse Holder: 1 to 20A Fuse Holder Voltage Max Operating:32V DC For Fuse Series:Mini Blade FuseATM Fuse included: Yes Feature: Cover.

3,fuse holders are safe for use below voltage Max Operating: 32V DC Material:copper+rubber, Fuse holder dimension:38x25x13mm. Fit for mini blade fuse.

#ad



Baomain Toggle Switch SPST ON-Off Type 2 Pin 12V 10A with Waterproof Cover for Auto Car

#ad
Baomain Electric Co.,Ltd #ad - Spst on-off toggle switch dc 12v 10a for vehicleelectrical life: 10, 000 Cycles Rating: 6a 125v ac; 3a 250v ac; 10a 12VDC. Dielectric strength: 1 Minute 1500 VAC. Insulation r: 500v dc, 1000M Ohm min. Contact r: 50m Ohm max. Operating temp: -25 C - 85 C.

#ad



GS Power 14 AWG True American Wire Gauge CCA Copper Clad Aluminum Primary Wire 25 ft Red & 25 ft Black. For Car Audio Speaker Amplifier Remote Trailer Harness wiring Also Available in 16 & 18 Ga

#ad
GS Power 8541758735 #ad - Perfect for vehicle audio radio, home Theater, signal turn on, 12v automotive, low voltage LED light 6 to 80 volts. Important: do not use for building/household 110/220 V ac wiring. Dielectric strength: 1 Minute 1500 VAC. 70 strands with 02 mm diameter per strand. True 14 american wire gauge AWG. 25 feet red & 25 feet black Stranded Copper Clad Aluminum Wire.

Insulation r: 500v dc, 1000M Ohm min. Visit www. Amazon. Com/gspower for all you wiring needs. Operating temp: -25 C - 85 C. Rating: 6a 125v ac; 3a 250v ac; 10a 12VDC. Contact r: 50m Ohm max.

#ad



General Technologies Corp GTC063 Fuse Socket Connector Kit

#ad
General Technologies Corp GTC063 #ad - Operating temp: -25 C - 85 C. Insulation r: 500v dc, 1000M Ohm min. Perfect for vehicle audio radio, 12v automotive, signal turn on, Home Theater, low voltage LED light 6 to 80 volts. Important: do not use for building/household 110/220 V ac wiring. Maxi, atc/ato, low-profile mini lpm, micro-2, mini, and micro-3 are the six most common blade fuse sizes in the automotive and vehicular electrical repair field.

These connectors are also useful for selectively enabling or disabling circuits in emergency or custom/modified vehicular applications. Easy access connector tabs fit 1/4" and 0205" quick-connects, jumper leads, alligator clips, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability.

General Technologies Corp GTC063 Fuse Socket Connector Kit #ad - 70 strands with 02 mm diameter per strand. Rating: 6a 125v ac; 3a 250v ac; 10a 12VDC. Visit www. Amazon. Com/gspower for all you wiring needs. The gtc063 fuse socket connector kit consists of six different connectors. 25 feet red & 25 feet black Stranded Copper Clad Aluminum Wire.

#ad



MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof Pigtail Blade Fuse Holder with 40AMP ATC Fuses

#ad
MUYI 5385731093 #ad - Insulation r: 500v dc, 1000M Ohm min. Ergonomically molded connector for easy insertion and extraction. Package included: 2 set2 x standard blade fuse holders2 x 40amp standard blade FusesATTENTION:1,Fuse holders are designed with 10 gauge wire and they can support fuses rating 2A, 3A, 5A, 7.5a, 30a, 20a, 15a, 10a, 40a.

2,it is important to select the correct Amp rating before you install or replace fuses even though they come with 2x 40Amp fuses. 3,fuse holders are safe for use below Voltage Max Operating: 32V DC. 70 strands with 02 mm diameter per strand. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside.

MUYI 2 Sets Inline Fuse Holder 10 Gauge Waterproof Pigtail Blade Fuse Holder with 40AMP ATC Fuses #ad - Excellent water-proof design. Dielectric strength: 1 Minute 1500 VAC. Contact r: 50m Ohm max. Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 3A, 40a, suitable for 1a, 20A, 15A, 30A, 7.5a, 5a, 10a, 2a, ideal for car truck trailer atv boat marine. Package included: 2 x standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.

True 14 american wire gauge AWG.

#ad



General Technologies Corp GTC CT6100 Fuse Socket Connector Kit

#ad
General Technologies Corp CT6100 #ad - Easy access connector tabs fit 1/4" and 0205" quick-connects, jumper leads, alligator clips, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability. These specially designed, plastic encapsulated connectors provide quick and reliable access to the fuse block circuits for testing voltages, currents and for tapping into the power line without damaging the fuse block or wiring in the vehicle.

Contact r: 50m Ohm max. Ergonomically molded connector for easy insertion and extraction. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Tap power for cooling fans, lamps relays, motors electric doors, power window, electric fuel pump, wiring harnesses etc. Easy access connector tabs fit are ¼ inches quick connects, alligator clips jumper leads, multimeter test leads.

General Technologies Corp GTC CT6100 Fuse Socket Connector Kit #ad - Can be used in the testing of cooling fans, power window motors, electric doors, lamps, relays, radios, wiring harnesses, electric fuel pumps, CD players and stereo power lines and any component or module wired or connected to the car or vehicle's fuse box. The easy access connector tabs are designed to be used with 1/4 inch quick connects, alligator clips, jumper leads or multimeter test leads.

Visit www. Amazon. Com/gspower for all you wiring needs.

#ad



Core Tools CT126-LS-B Black Push Button Waterproof Switch

#ad
Core Tools CT126-LS-B #ad - Designed to mount in a 3/8 inch hole, allowing for a clean, professional look. Tap power for cooling fans, electric fuel pump, motors electric doors, lamps relays, power window, wiring harnesses etc. Selectively enable or disable circuits for custom applications, taxis, such as emergency vehicles, or service vehicles.

10 awg thick red pigtail wire allow you to splice it into any project. Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Easy access connector tabs fit 1/4" and 0205" quick-connects, alligator clips, jumper leads, and multimeter test leads. Nickel-plated contacts for maximum conductivity and durability.

Core Tools CT126-LS-B Black Push Button Waterproof Switch #ad - Waterproof push button switch with Black Rubber Boot features 18 AWG 4. 50 inch wire leads with 025 inch stripped end lengths. Perfect for automotive, motorcycle, or utv electrical applications like lighting and accessories, this Push On, ATV, Push Off SPST switch also works great for most DC electrical projects.

Ideal for adding lights on a separate circuit from your stock lights, auxiliary spotlights, adding LED lighting, or switching a relay in higher power applications. Contact r: 50m Ohm max. Ergonomically molded connector for easy insertion and extraction.

#ad



Ulincos Auto Relay U1914 with 14AWG Wire Harness, 12V DC 30/40A SPDT 5-Pin Pack of 2

#ad
Ulincos U1914 #ad - Fits all maxi, ATO and Mini automotive fuse sockets. Ergonomically molded connector for easy insertion and extraction. The relay in fact is an automatic switch which uses a smaller current to control a larger current. Operating temp: -25 C - 85 C. Contact r: 50m Ohm max. What's the relay used for compatible with almost all automobiles and devices equipped with a 12V DC power supply.

. Perfect for vehicle audio radio, home Theater, signal turn on, 12v automotive, low voltage LED light 6 to 80 volts. Important: do not use for building/household 110/220 V ac wiring. Tap power for cooling fans, motors electric doors, power window, electric fuel pump, lamps relays, wiring harnesses etc. Perfect for automotive, atv, motorcycle, this push on, or UTV electrical applications like lighting and accessories, Push Off SPST switch also works great for most DC electrical projects.

Ulincos Auto Relay U1914 with 14AWG Wire Harness, 12V DC 30/40A SPDT 5-Pin Pack of 2 #ad - Waterproof push button switch with black Rubber Boot features 18 AWG 4. 50 inch wire leads with 025 inch stripped end lengths. 25 feet red & 25 feet black Stranded Copper Clad Aluminum Wire. True 14 american wire gauge AWG. If one goes bad, just unplug it from the socket and plug in a new one.

#ad



MUYI 2 Set Standard Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 20A ATC Fuses

#ad
MUYI 5824075156 #ad - Wide range of use, seat warming, can be used in automotive setup, vehicle lighting system, car sound system and various other applications. In-line fuse holder for standard blade fuses, Fuse holder dimension: 41x35x15mm. Fits all maxi, ATO and Mini automotive fuse sockets. Not easy to fall off or let water in.

Package included: 2 x standard Blade Fuse Holder and 2 X 20A Standard Blade Fuse. Plated contacts for maximum conductivity and durability. 30cm/12inches pigtail wire allow you to cut and splice it into any project. This makes mounting them easy and clean looking. Dielectric strength: 1 Minute 1500 VAC. Contact r: 50m Ohm max.

MUYI 2 Set Standard Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 20A ATC Fuses #ad - You can connect as many of these together next to each other as possible. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Tap power for cooling fans, lamps relays, power window, motors electric doors, electric fuel pump, wiring harnesses etc. Perfect for automotive, or utv electrical applications like lighting and accessories, motorcycle, this push on, atv, Push Off SPST switch also works great for most DC electrical projects.

Waterproof push button switch with black Rubber Boot features 18 AWG 4. 50 inch wire leads with 0

#ad



50 ft of Each Red and Black Single Conductor Remote Power Ground Hook-up - 14 Gauge Primary Stranded Wire

#ad
Best Connections CECOMINOD056889 #ad - With the wire harness - makes relay installation a breeze. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. 14 gauge, turn on, 50' ft, Single Conductor, remote, Hook Up Wire. Stranded copper clad aluminum. Tap power for cooling fans, motors electric doors, electric fuel pump, power window, lamps relays, wiring harnesses etc.

Perfect for automotive, atv, this push on, motorcycle, or UTV electrical applications like lighting and accessories, Push Off SPST switch also works great for most DC electrical projects. Waterproof push button switch with black Rubber Boot features 18 AWG 4. 50 inch wire leads with 025 inch stripped end lengths.

50 ft of Each Red and Black Single Conductor Remote Power Ground Hook-up - 14 Gauge Primary Stranded Wire #ad - 70 strands with 02 mm diameter per strand. Each socket has a male and female slide. Visit www. Amazon. Com/gspower for all you wiring needs. Wide range of use, vehicle lighting system, seat warming, can be used in automotive setup, car sound system and various other applications. In-line fuse holder for standard blade fuses, Fuse holder dimension: 41x35x15mm.

#ad



GS Power 14 AWG American Wire Gauge Pure Copper Primary Wire for Car Audio Speaker Amplifier Remote 12 Volt DC Automotive Trailer Harness Hookup Wiring. 15 feet Red, 15 ft Black Combo

#ad
GS Power #ad - Tap power for cooling fans, lamps relays, motors electric doors, electric fuel pump, power window, wiring harnesses etc. Selectively enable or disable circuits for custom applications, such as emergency vehicles, taxis, or service vehicles.10 awg thick red pigtail wire allow you to splice it into any project.

Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Tap power for cooling fans, electric fuel pump, lamps relays, power window, motors electric doors, wiring harnesses etc. Perfect for automotive, motorcycle, this push on, or UTV electrical applications like lighting and accessories, atv, Push Off SPST switch also works great for most DC electrical projects.

GS Power 14 AWG American Wire Gauge Pure Copper Primary Wire for Car Audio Speaker Amplifier Remote 12 Volt DC Automotive Trailer Harness Hookup Wiring. 15 feet Red, 15 ft Black Combo #ad - Waterproof push button switch with black Rubber Boot features 18 AWG 4. 50 inch wire leads with 025 inch stripped end lengths. 14 awg 15 ft red & 15 black stranded 99. 9% ofc pure Copper Wire. This makes mounting them easy and clean looking. If one goes bad, just unplug it from the socket and plug in a new one.

Not easy to fall off or let water in. Inline fuse holder for standard blade fuses, 15A, 30A, 40a, 20A, suitable for 1a, 3A, 7.

#ad