Made in USA – BlendMount BNR-2000R Aluminum Radar Detector Mount for Uniden R1/R3/DFR8/DFR9 – Compatible with Most American and Asian Vehicles – Looks Factory Installed

#ad
J28 Design, Inc. #ad - Get rid of those failing/falling suction cups that act as windshield Beacons for Thieves on the LookOut, and Clean Up your windshield with BlendMount !!! Only compatible with domestic and Japanese rear view mirrors that have a cylindrical-shaped Stem at least 1" long. If the cylindrical-shaped stem is not obviously 1" long, do the "Quarter Test" as shown in images.

This mount is not compatible with any European vehicles. Audi, jaquar, bmw, mini, Porsche, Land Rover etc. Mount your uniden r1/r3 series radar detector Without The SuctionCups !!! Not Compatible with New Uniden R7. We wanted to utilize the dead space around your mirror for a stealthy and centered mount with a factory-installed appearance.

Made in USA - BlendMount BNR-2000R Aluminum Radar Detector Mount for Uniden R1/R3/DFR8/DFR9 - Compatible with Most American and Asian Vehicles - Looks Factory Installed #ad - Blendmount is constructed Of Durable, Lightweight, Black Anodized Aluminum. Blendmount is a high quality mount proudly designed and manufactured in the USA by J28 Design, Inc. When we designed the BlendMount, quality and adjustability were our main objectives. Important: the radar detector release button is not used when installing and removing the detector.

Rear view mirror, mirrorTap Power Cord and Radar Detector NOT Included.

#ad



Radar Mount RJ11 Mirror Wire Radar Detector Hardwire Power Cord for Uniden DFR Series 3005201U

#ad
Radar Mount 4336324681 #ad - 12" mesh-loomed Cable with 0075" quick-Insert taps. Use a radar mount mirror wire power cord to quickly hardwire your Radar Detector to your car's powered rearview mirror in minutes! Fits all cars with powered rear view mirrors only auto-dimming, compass, map lights. Compatible with Uniden RJ11 Connector Detectors.

Inline micro-fuse protects your device. 12" mesh-loomed cable with 0075" quick-Insert taps. Tap adapters included for smaller harnesses. Quickly hardwire your Radar Detector in minutes! Tap adapters included for smaller harnesses. RadarMount. Com pn 3005201u - rj11 mirror wire power Cord for Uniden DFR Series Detectors.

Radar Mount RJ11 Mirror Wire Radar Detector Hardwire Power Cord for Uniden DFR Series 3005201U #ad - Inline micro-fuse protects your device. Pair a mirrorwire cord with our mirrormount for the ultimate factory-installed appearance, and superior detection range! - Quickly hardwire your Radar Detector in minutes! - Compatible with Uniden RJ11 Connector Detectors.

#ad



MirrorTap MTX-1010, RJ-11,10" Long Overall Length, Patented Radar Detector Power Cord with 2 Amp in-Line Fuse, Military Grade Taps, Made in USA

#ad
J28 Design, Inc. #ad - Overall cable length with taps is 10" Long. No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. No cutting or splicing wires. The cable assembly length without the taps is 8" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord.

Compatible with Uniden RJ11 Connector Detectors. Inline micro-fuse protects your device. 12" mesh-loomed cable with 0075" quick-Insert taps. Tap adapters included for smaller harnesses. The mirrortap is constructed of 24 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve. Compatible radar detectors have rj-11 jack: escort, beltronics, Valentine One, R1/R3, Radenso XP/SP and Uniden DFR6/7, LRD950/850.

MirrorTap MTX-1010, RJ-11,10" Long Overall Length, Patented Radar Detector Power Cord with 2 Amp in-Line Fuse, Military Grade Taps, Made in USA #ad - Us patended Design. Mirrortap mtx-1010, military grade taps, rj-11, high quality radar detector power Cord With 2 Amp In-Line Fuse, 10" Long overall length, Made in USA Quickly hardwire your Radar Detector in minutes!.

#ad



Uniden R3DSP R3 Dsp Extremely Long-Range Radar Detector/Laser Detector with GPS

#ad
Uniden R3 #ad - Free gpS database updates. Compatible radar detectors have rj-11 jack: escort, beltronics, Valentine One, Radenso XP/SP and Uniden DFR6/7, R1/R3, LRD950/850. Us patended Design. Overall cable length with taps is 10" Long. The cable assembly length without the taps is 8" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord.

Compatible with Uniden RJ11 Connector Detectors. Inline micro-fuse protects your device. 12" mesh-loomed cable with 0075" quick-Insert taps. Tap adapters included for smaller harnesses. The mirrortap is constructed of 24 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve. Uniden’s r3 is a top of the line radar detector with a built-in gps feature with the r3 you can mark geographical points where you commonly encounter radar transmissions These can be school zones red-light cameras and places where police frequently monitor traffic You can mark these points so the detector will announce “User mark ahead” when you approach them Among other announcements the Voice Notification feature lets you know when you are approaching a radar and what type of radar it is red light speed etc Quickly hardwire your Radar Detector in minutes!

Uniden R3DSP R3 Dsp Extremely Long-Range Radar Detector/Laser Detector with GPS #ad - Extreme Radar sensitivity. No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. Gps with red-light camera alerts.

#ad



Uniden R3 Extreme Long Range Radar Laser Detector GPS, DSP, Voice Alert, Silver

#ad
Uniden #ad - No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. Gps with red-light camera alerts. No cutting or splicing wires. Extreme Radar sensitivity. Uniden r3 dsp extreme long range radar and laser detector w/gpsexperience the unsurpassed range with the Uniden R3 radar detector!With the convenient GPS feature you can get Red light camera alerts, Mute memory false alerts, or mark location.

Extreme performanceextreme range laser radar detection360 degree protectionextreme radar sensitivitydigital signal processorgps built-in with free gps database updatesred light camera Alert with Free database updatesSpeed Camera AlertVoice AlertsAdvanced K / KA Band FilterK false filterKA false filterVoice NotificationsQuiet Ride Speed-based Auto MuteEasy to Read Ultra-bright Multi-color OLED DisplayRadar Band Frequency DisplayCurrent SpeedBattery VoltageAltitudeClockSpectre Elite UndetectableMAX Speed Warning SystemSingle suction cup bracket includedDouble suction cup bracket includedCarrying Case IncludedCigarette Power adapter with "Mute Key" and USB port charger Quickly hardwire your Radar Detector in minutes!

Uniden R3 Extreme Long Range Radar Laser Detector GPS, DSP, Voice Alert, Silver #ad - Gps with red Light Camera Alerts. Overall cable length with taps is 10" Long. Compatible radar detectors have rj-11 jack: escort, beltronics, R1/R3, Valentine One, Radenso XP/SP and Uniden DFR6/7, LRD950/850. Us patended Design. Digital signal processor. Quiet ride - user Set Speed Auto Mute.

#ad



MTX-1015, RJ-11, 15" Long Overall Length, Patented Radar Detector Power Cord with 2 Amp in-Line Fuse, Military Grade Taps, Made in USA

#ad
J28 Design, Inc. MT-1015 #ad - Free gpS database updates. Quiet ride with user-set speed Auto mute. Compatible radar detectors have rj-11 jack: escort, r1/r3, Radenso XP/SP and Uniden DFR6/7, Valentine One, beltronics, LRD950/850. Us patended Design. The cable assembly length without the taps is 13" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord.

Compatible with Uniden RJ11 Connector Detectors. Inline micro-fuse protects your device. 12" mesh-loomed cable with 0075" quick-Insert taps. Tap adapters included for smaller harnesses. The mirrortap is constructed of 24 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve. The cable assembly length without the taps is 8" Long.

MTX-1015, RJ-11, 15" Long Overall Length, Patented Radar Detector Power Cord with 2 Amp in-Line Fuse, Military Grade Taps, Made in USA #ad - This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord. K false filter / KA False Filter. No cutting or splicing wires. No cutting or splicing wires. Finally that should define which two ports in that harness into which you would plug the MirrorTap, the black Prong into #4 above, and the Red to #7.

#ad



Uniden RDA-HDWKT Radar Detector Smart Hardwire Kit with Mute Button, LED Alert and Power LED. for Uniden R7, R3, R1, DFR9, DFR8, DFR7 and DFR6.

#ad
Uniden RDA-HDWKT #ad - High quality connectors for years of use. Gps with red-light camera alerts. The cable assembly length without the taps is 13" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord. Simple installation to hardwire your Radar Detector in minutes! Gps with red Light Camera Alerts.

Hardwire your radar's power connection to keep your 12-volt outlet free for charging other portable devices. 360 degree Digital Signal Processor. No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. No cutting or splicing wires.

Uniden RDA-HDWKT Radar Detector Smart Hardwire Kit with Mute Button, LED Alert and Power LED. for Uniden R7, R3, R1, DFR9, DFR8, DFR7 and DFR6. #ad - Includes hardware kit velcro tape and t-tap electrical connector for use with radar detectors r1 r3 dfr6 and dfr7 product does not require a battery allows compatible detectors to be directly plugged into fuse box for a simple and clean installation easier control and added functionality Mute button allows user to mute the alert and for GPS models to activate mute memory user presses 2x Alert LED will blink when alert is received Power LED will light up when powered on Compatible with UnidenR detectors R1 R3 DFR6 and DFR7 One year Made in South Korea Black color 1 57 in L x 1 25 in H The Uniden Radar Detector Hardwire Kit with Mute Button allows you to directly plug your compatible Uniden radar detector into your car's fuse box and easily control the mute functionality Installation is simple and clean for the compact unit It is compatible with the Uniden R1 R3 DFR6 and DFR7 radar detectors Quickly hardwire your Radar Detector in minutes!

Digital signal processor. Overall cable length with taps is 15" Long.

#ad



Radar Detector 10ft Hardwire Kit for Escort Valentine One Uniden Beltronics | 3 Sizes of Tap a Fuse Included | Quick Connection Plug and Play

#ad
Gold Label Detailing 4350440519 #ad - Compatible radar detectors have rj-11 jack: escort, radenso XP/SP and Uniden DFR6/7, R1/R3, Beltronics, valentine one, LRD950/850. Patented Design. Quiet ride - user Set Speed Auto Mute. The cable assembly length without the taps is 13" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord.

K false filter / KA False Filter. Compatible with Uniden RJ11 Connector Detectors. Inline micro-fuse protects your device. 12" mesh-loomed cable with 0075" quick-Insert taps. Tap adapters included for smaller harnesses. The mirrortap is constructed of 24 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve.

Radar Detector 10ft Hardwire Kit for Escort Valentine One Uniden Beltronics | 3 Sizes of Tap a Fuse Included | Quick Connection Plug and Play #ad - No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. Gps with red Light Camera Alerts. Easily connect multiple types of radar detectors including escort passport, 7500, Valentine 1, Max, Solo S2, 7500S 8500, 8500 X50, 6800, Max 360, and Uniden.

Compatible uniden radar detectors r7 R3 R1 DFR9 DFR8 DFR7 and DFR6. High quality connectors for years of use. Uniden hardwire kit with mute button for select windshield mount radar detectors.

#ad



Radar Detector 12" Mirror Plug Wire Tap RJ11 Hardwire Power Cord Kit for Escort Valentine One Uniden Beltronics | Tap Existing Mirror Plug | Inline Fuse with Braided Dual Size Pins

#ad
Gold Label Detailing 13 #ad - Hardwire your radar's power connection to keep your 12-volt outlet free for charging other portable devices. 2 sizes of both 12v and Ground Pins to ensure fitment with many types of plugs. No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed.

. The cable assembly length without the taps is 8" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord. In line fuse - Circuitry Protection Built In. Durable - braided Wire for Lasting Durability and Flexibility. K false filter / KA False Filter. Free gpS database updates.

Radar Detector 12" Mirror Plug Wire Tap RJ11 Hardwire Power Cord Kit for Escort Valentine One Uniden Beltronics | Tap Existing Mirror Plug | Inline Fuse with Braided Dual Size Pins #ad - Gps with red-light camera alerts. Compatible uniden radar detectors r7 R3 R1 DFR9 DFR8 DFR7 and DFR6. Quickly hardwire your Radar Detector in minutes! Overall cable length with taps is 15" Long. No cutting - simply insert Pins Into 12v and Ground In Mirror Plug. Fuses included - comes With 5a Fuse For Each Tap-A-Fuse.

No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed.

#ad



Direct Hard Wire Cord for Uniden LRD850,LRD950,DFR6,DFR7,DFR8,DFR9,R1,R3 & R7

#ad
GPS-Radar-Shop 4336324677 #ad - In line fuse - Circuitry Protection Built In. No more coiled cigarette lighter power cords, the MirrorTap Power Cord simply slides into your Auto Dimming mirror's wire harness exposed OR concealed. Works on lrd-850, lrd-950, dfr6 & dfr7 uniden radar Detectors w/RJ11 Power Jack. No cutting or splicing wires.

Free gpS database updates. 360 degree Digital Signal Processor. Hardwire kit- 10ft wire with 3x tap-a-fuse and 3x 5a Fuses. Quiet ride with user-set speed Auto mute. Quiet ride - user Set Speed Auto Mute. Hard wire direct wire kit for uniden lrd850, dfr7, lrd950, dfr9, r1, dfr8, dfr6, R3 & R7 Models Quickly hardwire your Radar Detector in minutes!.

Direct Hard Wire Cord for Uniden LRD850,LRD950,DFR6,DFR7,DFR8,DFR9,R1,R3 & R7 #ad - Multiple fuse sizes - tap-a-fuse in 3 Common Sizes ATC, Mini, and Low Profile Mini. Extreme Radar sensitivity. The cable assembly length without the taps is 8" Long. This new mtx series mirrortap has all four Tap-Size Pairs included, unlike any competitors power cord. Hardwire your radar's power connection to keep your 12-volt outlet free for charging other portable devices.

Fits multiple radar detectors - Escort, Valentine 1, Uniden. Fuses included - comes With 5a Fuse For Each Tap-A-Fuse.

#ad



HardTap HT-1096 Hard Wire Kit, Radar Detector, Power Cord with Inline Fuse, RJ11, 8' Long

#ad
J28 Design, Inc. HT-1096 #ad - Overall cable length with taps is 15" Long. Compatible radar detectors have rj-11 jack: escort, radenso XP/SP and Uniden DFR6/7, R1/R3, valentine one, Beltronics, LRD950/850. Patented Design. Compatible radar detectors have rj-11 jack: escort, radenso XP/SP and Uniden DFR6/7, R1/R3, Valentine One, beltronics, LRD950/850.

Us patended Design. Gps with red-light camera alerts. Simple installation to hardwire your Radar Detector in minutes! No cutting or splicing wires. Hardwire kit- 10ft wire with 3x tap-a-fuse and 3x 5a Fuses. Proudly designed and manufactured in the USA by J28 Design, Inc. Makers of blendmount and MirrorTap product Lines Quickly hardwire your Radar Detector in minutes!

HardTap HT-1096 Hard Wire Kit, Radar Detector, Power Cord with Inline Fuse, RJ11, 8' Long #ad - Digital signal processor. Free gpS database updates. In line fuse - Circuitry Protection Built In. The mirrortap is constructed of 24 gauge wire with a 2 amp inline fuse and a black braided flexible sleeve. Compatible uniden radar detectors r7 R3 R1 DFR9 DFR8 DFR7 and DFR6. Fits multiple radar detectors - Escort, Valentine 1, Uniden.

#ad