Ancor 312603 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Ring Terminals 12 to 10-Gauge, Size 3/8 Screw, 3-Pack

#ad
Ancor 312603 #ad - Marine gradetm heat shrink ring connectors feature tinned copper for maximum current flow and corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Wire range: 12-10 screw Size: 3/8 in. Heat activated adhesive built into the sleeve of the heat shrink tubing.

. Adhesive lined heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. Ul listed and CSA recognized. Quantity: 3 3/8" screw, 12-10 awg, 3 pack of Heat Shrink Ring Terminals.

#ad



Ancor 309203 Marine Grade Electrical Nylon Insulated Adhesive Lined Heat Shrink Butt Connectors 12 to 10-Gauge, Yellow, 3-Pack

#ad
Ancor 309203 #ad - Ul listed and CSA recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Marine gradetm heat shrink butt connectors feature tinned copper for maximum current flow and corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow.

Adhesive line heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. Wire range: 12-10 quantity: 3 3 pack of 12-10 awg heat Shrink Butt Connectors.

#ad



Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 3 Pack

#ad
Marinco Electrical Group 320803 #ad - Ul 310 and cSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. 3 pack of 12-10 awG female heat shrink disconnects. Tinned for corrosion resistance, Pure copper for maximum current flow.

Heat activated adhesive built into the sleeve of the heat shrink tubing. 3 pack of 12-10 awg heat Shrink Butt Connectors. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief. Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 3 Pack #ad - Tinned for corrosion resistance, Pure copper for maximum current flow. Ul listed and CSA recognized.

#ad



Ancor 108802 Marine Grade Electrical Primary Tinned Copper Boat Wiring 10-Gauge, Red, 25-Feet

#ad
Ancor Marine Grade Products 108802 #ad - Ul listed and CSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Shrinks to form a water tight seal and the ultimate vibration and strain relief. 25 feet of red 10 AWG marine grade wire. 3 pack of 12-10 awG female heat shrink disconnects.

Tinned for corrosion resistance, Pure copper for maximum current flow. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, oil, 105 deg C dry and 75 deg C wet, heat, gasoline, abrasion and ultra-violet radiation.

Ancor 108802 Marine Grade Electrical Primary Tinned Copper Boat Wiring 10-Gauge, Red, 25-Feet #ad - Ul 310 and cSA recognized. Ultra flexible Type 3 stranding resists fatigue due to vibration and flexing. Heat activated adhesive built into the sleeve of the heat shrink tubing. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ancor marine gradetm wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis.

3 pack of 12-10 awg heat Shrink Butt Connectors. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

#ad



Ancor Marine Grade Duplex Cables

#ad
Ancor Marine Grade Products 124102 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. Ul listed and CSA recognized. The premium vinyl insulation is rated at 600v, battery acid, 105C dry and 75C wet, stays flexible even in extreme cold -40F/C and resists salt water, gasoline, heat, oil, abrasion and ultra-violet radiation.

. Heat activated adhesive built into the sleeve of the heat shrink tubing. The premium vinyl insulation is rated at 600 volts, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, oil, gasoline, heat, abrasion and ultra-violet radiation. These cables exceed ul 1426 standards and are made from the highest quality ultra flexible Type 3/Class K tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.

Ancor Marine Grade Duplex Cables #ad - Ul 310 and cSA recognized. Tinned for corrosion resistance, Pure copper for maximum current flow. 3 pack of 12-10 awg heat Shrink Butt Connectors. 25 feet of red 10 AWG marine grade wire. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

#ad



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

#ad
Acr Electronics 5191 #ad - They are constructed with premium vinyl insulation that is rated at 600 volts, oil, gasoline, 105 deg C dry and 75 deg C wet, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Insulating cap prevents accidental shorts. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards.

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP #ad - 25 feet of red 10 AWG marine grade wire. Compact, inverter, high-amp fuse—appropriate for DC Main, windlass, and bow thruster circuit protection. Ul listed and CSA recognized. Ul 310 and cSA recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

#ad



Blue Sea Systems Common 100A 5-Gang Mini BusBar with Cover

#ad
Blue Sea Systems 2314 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Heat activated adhesive built into the sleeve of the heat shrink tubing. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

2 mounting holes accept #10 M5 screws. 25 feet of red 10 AWG marine grade wire. 3 pack of 12-10 awg heat Shrink Butt Connectors. Ul 310 and cSA recognized. The premium vinyl insulation is rated at 600 volts, gasoline, oil, battery acid, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation.

Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, amps max operating: 300a per block, terminal stud Size: 5/16"-18 8mm, Mounting Hole Size: #10 5mm3/8". Compact, inverter, windlass, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Blue Sea Systems Common 100A 5-Gang Mini BusBar with Cover #ad - They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, battery acid, oil, heat, abrasion and ultra-violet radiation. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

#ad



Blue Sea Systems 30A MRBF Terminal Fuse

#ad
Blue Sea Systems 5175 #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. The premium vinyl insulation is rated at 600 volts, gasoline, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, 105 deg C dry and 75 deg C wet, oil, abrasion and ultra-violet radiation.

Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8". Compact, windlass, inverter, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Blue Sea Systems 30A MRBF Terminal Fuse #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Tinned for corrosion resistance, Pure copper for maximum current flow. 25 feet of red 10 AWG marine grade wire. Ul 310 and cSA recognized. Fuses sold separately. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal.

Ignition protected-safe for installation aboard gasoline powered boats.

#ad



Ratcheting Single Crimp

#ad
MARINCO 703010 #ad - Fuses sold separately. Tinned for corrosion resistance, Pure copper for maximum current flow. Ip66 - protected against powerful water jets. 2 mounting holes accept #10 M5 screws. When it comes to marine electrical wiring, connectors Also have to be able to stand up to the corrosive ocean environment. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Insulating cap prevents accidental shorts. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. 4 color-coated cavities for different wire sizes. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Ratcheting Single Crimp #ad - The premium vinyl insulation is rated at 600 volts, 105 deg c dry and 75 deg C wet, heat, battery acid, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, abrasion and ultra-violet radiation. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8".

Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

#ad



Ancor 220011 Heat Shrink Butt Connector Kit

#ad
MARINCO 220011 #ad - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity, cover made with clear polycarbonate. Heat activated adhesive built into the sleeve of the heat shrink tubing. Visible indication of blown condition. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Tinned for corrosion resistance, Pure copper for maximum current flow. 100a mini busbar with 5 screws and a cover. Ratcheting operation with ergonomic handle to prevent hand fatigue. They are constructed with premium vinyl insulation that is rated at 600 volts, heat, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, 105 deg C dry and 75 deg C wet, battery acid, abrasion and ultra-violet radiation.

Ancor 220011 Heat Shrink Butt Connector Kit #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. 25 feet of red 10 AWG marine grade wire.

Tinned for corrosion resistance, Pure copper for maximum current flow. 3 pack of 12-10 awG female heat shrink disconnects. Part number: 220011.

#ad



Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

#ad
Acr Electronics 5025 #ad - Insulating cap prevents accidental shorts. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Part number: 220011. They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, heat, gasoline, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, battery acid, abrasion and ultra-violet radiation.

Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Exceeds all ul 1426, us coast guard charter boat CFR title 46 and ABYC standards. Pack of 1, 30a terminal fuse, Max voltage: 58V DC.

Blue Sea Systems 5025 ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover #ad - Continuous rating: 100A AC/DC. Accepts ato and ATC fast acting blade fuses. 3. 32"w x 4. 9"h x 1. 52"d. Fuses sold separately. The premium vinyl insulation is rated at 600 volts, oil, stays flexible even in extreme cold -40 deg F/C and resists salt water, 105 deg C dry and 75 deg C wet, heat, battery acid, gasoline, abrasion and ultra-violet radiation.

#ad